Where can I find a youth stock for a short action Stevens with 4.4 screw spacing center feed? I can't find one on the web anywhere.
Printable View
Where can I find a youth stock for a short action Stevens with 4.4 screw spacing center feed? I can't find one on the web anywhere.
My suggestion would be to take a wood stock, cut it down a bit (1-2 inches, depending on the measurement of your shooter) and then put a grind to fit recoil pad on the end.
That presumes you have the skills and tools to do those things. If not, there are not a lot of choices out there that I know of. Perhaps your local Gunsmith can do it for you?
The gun came with a synthetic stock. Guess I will have to buy a wood one and cut it down. Wasn't wanting to do that but guess I have no other option.
http://www.gunpartscorp.com/Products/1050670.htm
After 30 min. of searching through Numrich's new not so friendly web site I think this is what you want.
Thanks for the help froggy.
Found this also. Would it work? Says short action. Don't give screw spacing or cf or sf?
https://www.gunpartscorp.com/Products/1050720.htm
Changing the screw holes and fitting the mag only takes a little time and patience,some epoxy,a piece of lamp rod(for pillars) and a small wood shim for the mag well. It will still be a lot cheaper than a custom.
If you call they will answer your questions on sf/cf and that will tell you your screw spacing. Model 12 is SA.
Just for reference, the above youth stock that I posted a link to is a 4.25 screw spacing. Nice stock for the money. Still can't find one to fit a new action. I will either trade this one, or epoxy it and make it work.