Has anybody try David Tubbs 115 DTAC's in their 6BRX.
The 6mm Dasher has a very close load compared to the BRX.
It seems like the 115's should work in the BRX.
Printable View
Has anybody try David Tubbs 115 DTAC's in their 6BRX.
The 6mm Dasher has a very close load compared to the BRX.
It seems like the 115's should work in the BRX.
Anyone?
Tried 'em in a 6x47L. Didn't work as good as the 105 Amax or 105 Berger's in my rifle.
I don't have a 1:7 twist barrel so they are out for me. That is what I was told they needed to fly. Tim
When I talked to David a few years back he said that the 115 would stabilize in a 1 in 8 twist barrel if you keep the velosity (If I remember right) above 3500. They are made by Sierra for Tubbs, they are made to use the same chamber specks as a 107 SMK. (There is a trade off as Tubbs, does the moly coating for Sierra.) I shot them in a 6x47L and in a 6BR, and they stabilized in both with 1 in 8 twist barrels. I just never seen anyting impressive with them, and found that the 107 SMK's just shot better. I also didn't care for the HBN coating that is applied to them. (Now he offers them uncaoted. The smallest amount you can buy is 500. I sold the box I had some time back. Berger has made a 115 bullet for years now, and I found that it shoots about on par as the Tubbs bullet. IMO there are far better 6mm bullets out there.