This is my model 10FCPHS. I enjoy this rifle as it holds .5 MOA groups at 300 but I have a big issue with it. A lot of the time it is hard to eject the spent case, I chamber it fire and when I try to eject it the bolt does not want to pull back. Granted I shoot handloads and they are all trimmed to spec and loaded moderately but they chamber and fire great just don't want to eject. I polished the chamber with bore brushes bronze wool and JB bore paste to almost a mirror shine and I still have the issue. The brass coming out looks fine. Any insight? Thanks.
How I got it. It was "used", zero rounds through it but someone went nuts with the krylon.
http://i27.photobucket.com/albums/c1...2-00028jpg.jpg
http://i27.photobucket.com/albums/c1...1-00026jpg.jpg
Paint halfway stripped.
http://i27.photobucket.com/albums/c1...7-00034jpg.jpg
Nightforce NXS gone and replaced with a Leupold Mark 4 LRT.
http://i27.photobucket.com/albums/c1...9-00150jpg.jpg
Extended mag.
http://i27.photobucket.com/albums/c1...9-00151jpg.jpg
Before the range day.
http://i27.photobucket.com/albums/c1...t/b8b29ea3.jpg
After. These are 300yd groups.
http://i27.photobucket.com/albums/c1...t/31e657aa.jpg
http://i27.photobucket.com/albums/c1...t/4d423ee6.jpg
http://i27.photobucket.com/albums/c1...t/77d74d2d.jpg