two layers of scotch tape and bolt starts to cam over but won't close. little loose?
Printable View
two layers of scotch tape and bolt starts to cam over but won't close. little loose?
I only use one layer of tape when I reset the headspace on all barrels.... even factory.
the difference between a go and a no-go is .004", so measure the go gauge, then add tape until the go gauge measures .004" longer and you will be fine.
It really depends on the brand of tape. I have used some that needed 1 layer and some that have needed 2 layers.
One piece of Scotch brand tape and GTG...
I couldn't remember if it was one or two layers of scotch brand tape. I'll measure it regardless.
thanx, Ted