confirmation on part

Well I was completely taking apart a bolt and a bolthead to get a better understanding of the parts and low and behold I lost a part. The part that went into never ever land was http://www.brownells.com/.aspx/pid=1...roduct/Ejector, I believe. It is the part that is next to the firing pin hole that has a spring behind it. The bolt head that it came out of is http://www.brownells.com/.aspx/pid=1...roduct/Ejector. Could one of you Savage guru's look at these parts and make sure it is the right part before I order it, thanks.

What model rifle do you have?

It's a stevens but the bolthead is for a 308.

Nevermind, after 2 hours I found it but the extractor detent ball went into orbit next. Just ordered another one and time for a break/cold beverage.

Quote:

---

Originally Posted by Bayou

Nevermind, after 2 hours I found it but the extractor detent ball went into orbit next. Just ordered another one and time for a break/cold beverage.

---

This is why you put the part into a large ziplock bag to remove/install said parts.
The detent ball can be had from a hardware store that has the 1/4" lynch pins. Cut the pin next to the ball & remove...same size & cheaper!

Well I gaurantee next time I will use the bag, live and learn.