New install SSS Competition Trigger- need help
I am attempting to install a new SSS Competition trigger and have stumbled on something I cant figure out. I need a little help!!
110 action, pre accutrigger. SSS-Competition trigger. I dont think the sear and trigger are engaging properly. What am I doing incorrectly here?
http://www.fotolode.com/images/sabersix315/trigger.jpg
Re: New install SSS Competition Trigger- need help
I did the same thing on my 1st one. IRC pull the trigger back out and flip the part you have circled over.
Once you get it right you'll slap yourself.
Re: New install SSS Competition Trigger- need help
did you put the bolt in and see how it lines up when cocked?
Re: New install SSS Competition Trigger- need help
The part I have circled came from SSS installed. I am reluctant to remove it and flip it over.
The bolt will not install, the bolt release will not retract, and for more info, the trigger will not move at all.
Picture from other side:
[img width=458 height=768]http://www.fotolode.com/images/sabersix315/trigger2.jpg[/img]
Re: New install SSS Competition Trigger- need help
you many have the trigger pinched to tight. Back off the lock nut a bit.
Re: New install SSS Competition Trigger- need help
Sorry I didn't mean remove it from the way you got it from SSS. Uninstall it and swing the hammer(or what ever it's called) a
different way. Once you get it right you have to thread the screw in as the holes are not quite lined up. That's the way they are made.
I know this may not sound right but once you get it you'll go, well Heck.
Re: New install SSS Competition Trigger- need help
I think swing hammer is a great name!!
I have it removed and will play with it.
Re: New install SSS Competition Trigger- need help
Got it. Thank you both.
Sean
Re: New install SSS Competition Trigger- need help
Good deal Have fun!!!!!!!!!