Would like to rebarrel my 12 vLP to 22 PPC. Have .223 and 22-250 boltheads. What would I need? Also need a source of ammo or brass Any problems to look out for. Thanks for any help.
Printable View
Would like to rebarrel my 12 vLP to 22 PPC. Have .223 and 22-250 boltheads. What would I need? Also need a source of ammo or brass Any problems to look out for. Thanks for any help.
The PPC has its own bolt head of roughly .450”+/-. It’s the same as the 7.62x39 Russian Bolt Head. The 22-250 uses the standard bolt head. (Too large). And the 223 is two sizes under.
PPC uses a .445" bolt face, which can be made from the .223 bolt head. You'll need .220 Russian brass and it won't be available till July '24. You may want consider a 22 BR. It would use the .22-250 boltface, and 6 br brass is out there.
People have used standard bolt heads, but this the correct one. https://www.gunshack.com/savage-part...ead-right-hand They are two different sizes.
Edit: I forgot this bit but I actually agree here. The 22BR or even stick with 6BR, is IMO, a better choice for the same reasons listed above. Can use your existing bolt head without any changes, and good Brass is available.