I want to get rid of the Cocked Indicator on my bolt.

I have a newer Model 10T and want to get rid of the indicator in the rear of the bolt that shows the rifle is cocked.

Exactly what parts do I have to replace/add in order to do this.

I want to end up with a bolt just like the old models that just had a hex socket hole in the rear of the bolt assembly screw with no indicator.

go to Gun parts Corp. , you will need a BAS (bolt action screw) cocking sleeve, firing pin assembley

Quote:

---

Originally Posted by drybean

go to Gun parts Corp. , you will need a BAS (bolt action screw) cocking sleeve, firing pin assembley

---

Thanks for the reply. Must be a lot of people wanting to do the same thing. This Co. is Sold Out of these pieces. Did find what I needed from two other sources though,


Thanks for the help.

Deadshot2, I'm going to send you a PM with a link in it that I think will help you out.