Put together another Savage today

Put together another Savage today
New take off Matte Black Savage 10FP .308 Accu-trigger Receiver staggered feed. Stainless steel handle cut and threaded with an aluminum knob
A new Sharp Shooter Supply Stainless Steel Competition Recoil lug
Bell & Carlson Medalist Varmint/Tactical Stock Black w/Gray web pattern.
Warne Maxima series 1 pc 0MOA Picatinny Rail
24" Stainless Steel .308 Lothar Walther Savage Varmint Match Barrel
Its currently being Dev-Con steel bed and drying

[img width=600 height=450]http://img.photobucket.com/albums/v198/FMSNIPER/P1310013.jpg[/img]
[img width=600 height=450]http://img.photobucket.com/albums/v198/FMSNIPER/P1310014.jpg[/img]
[img width=337 height=450]http://img.photobucket.com/albums/v198/FMSNIPER/P1310016.jpg[/img]
[img width=600 height=450]http://img.photobucket.com/albums/v198/FMSNIPER/P1310024.jpg[/img]

Looks really good,

I remember a member that went by the name of "spook" that made bolt handles similar to the one you've got.

NIce setup. You're gonna love that LW barrel!

I sure would like to know more about the barrel. Did Lothar Walther ream, thread, cut and crown? And I can't wait to hear how it shoots.
Charlie

its a drop in from LW will shoot it today

Dear Sniper, can you tell me how long it took LW to deliver that barrel from the time you ordered it?
Also can you share with us the cost of the barrel. I am thinking of using an LW for my next .243 build.

Thanks
Charlie

Here ya go:

http://www.lothar-walther.com/339.php

gun shot great only issue is my scope is drifting, its an older Shepherd I saw the reticle shift after most every shot, its a dual reticle so you can see the shift between them, i am sending it into shepherd for repair, will try another scope later

[img width=340 height=450]http://img.photobucket.com/albums/v198/FMSNIPER/newsavtarget.jpg[/img]

mounted a falcon menace on it, will shoot it tomorrow

until then here is a photo of the pair I have
[img width=600 height=450]http://img.photobucket.com/albums/v198/FMSNIPER/P1310096.jpg[/img]

Oh yeah, I like those. Great job.

Charlie I did not order it I bought it from a member at AR15.com, sorry no help for you

Quote:

---

Originally Posted by Harriershot

Dear Sniper, can you tell me how long it took LW to deliver that barrel from the time you ordered it?
Also can you share with us the cost of the barrel. I am thinking of using an LW for my next .243 build.

Thanks
Charlie

---

wasnt that a project that was also for sale here as well?

I think it was I paid 700 for everything

I ordered a Savage barrel from Lothar Walther last month it took about a week to get it.

You got a pretty good deal. And it looks great as well. ;)

agreed all i did was check the receiver for trueness and devc0on steel bed it, then head-space it now its up and running going to the range after work to test it with a good scope, already have a trade offer for a DPMS AR10 LR 24 inch barrel from my co worker

Ok back from the range
5 rounds American eagle 168 grain OTM factory ammo 100 yards, 5 th shot out was me.
[img width=337 height=450]http://img.photobucket.com/albums/v198/FMSNIPER/P1310129.jpg[/img]

Just curious because I'm thinking of building something similar and most likely with that stock, what does it weigh? With or without the scope.

have not weighed it, not very heavy though stock is light barrel made it front heavy, I gave the rifle to my co worker my Cpatain, as I have enough 308, bolt guns I traded it for a AR10,, I will ask him what it weighs