annealeez

Just watched a video on you tube where the guy had the annealeez and was putting it together. The thing that was different on his than mine was he had a thumbnut on the brass "ground clamp" that holds the torch. Getting the torch to sit right is the biggest pita part of using the machine. I emailed them to see if they offered that part as an upgrade.


Do any of you have that one? Is that a common enough configuration of clamp that you can get one at ace or similar place? I did a limited search and couldn't find one with two threaded holes.

Pretty sure you can get those at an electrical Suppy Co. I doubt lowes ect would have them but might want to check...you could just drill and tap the one you have and stack washers on the back or use a shorter bolt.

Jeff is sending me one. There is a great video about putting a flexible camera arm there for easy adjustment.