Not sure if this was the place to ask but what would be the best tool to relieve the barrel channel on a laminated stock?
It's not going to take much, just a little in front of the chamber.
Thanks, John.
Printable View
Not sure if this was the place to ask but what would be the best tool to relieve the barrel channel on a laminated stock?
It's not going to take much, just a little in front of the chamber.
Thanks, John.
Sand paper flapper wheel, that is what I use.
Dean
Sand paper wrapped around a wooden dowel or deep socket. Seal with Brichwood Casey stock seal or outdoor polyurethane.
The sandpaper flapper wheel sounds like a good idea. I've used 40 grit sandpaper around a 1" wooden dowel with good results. http://img.tapatalk.com/d/14/03/30/jajudugy.jpg
I like to use the sockets, just because they have some heft, and I can easily vary the diameter depending on how much I need to open the channel.