I'm wondering if the new short screw spacing Target Action could be adapted to a Choate Tactical by simply filling the blind magazine well and fitting a middle and front pillar? Am I on the right track, or would there be issues with the bedding block?
So, I've been giving this some thought. I am going to try bridging the mag well with a piece of aluminum, placed so that it is beneath the Choate v-block. I will epoxy it into place, and use it as a sort of pillar bar, if you will, so that the action screws pull against it and the action, clamping the Choate block between the two. Of course I will bed the action bottom, and fill the mag well completely in addition.
I may not have described this very well, but let me work on a few sketches to get the idea across.