Has anyone had experience with the above? They appear to be a very good idea.
Printable View
Has anyone had experience with the above? They appear to be a very good idea.
Thats all I use. I get my 20moa w/ the inserts by using +10 in the bottom on the back (-10 on the top), and -10 on the bottom on the front (+10 on the top). They work great, account for any misalignment btwn frnt and rear, and never make a mark on the scope.
I have them on every rifle I own except a CZ 527. They don't make them for that gun.
Charlie
I have the Signature Zee Rings on 6 rifles. I have never had a bad experience with them. I don't shoot heavy kicker mag calibers. A friend calms the rings allowed first scope to move with his 300 RUM. I love my shoulder too much to shoot something like that. I think they are the best thing going. Tim
I have them on my 338RUM and they've never moved.
Best rings ever. I wish they would make them in a Picatinny.
+1 here too
Wish they made them in 1" matte low
Awsome Rings!!! I would definately recommend.
from what I have seen most everybody on this site uses these rings, and for very good reason. They are great rings. I have them on all of my rifles but one(and have a set waiting to swap it out).
Just the fact they dont mar the scope is reason enough, but the insert adjustments make these a no-brainer.
Some people have questioned the security of them, as if the plastic will hold the scope and not let it move under heavy recoil. I have a set on my 12ga slug gun and they work perfect.
I recommend them to everyone I see.
I agree with all on the signature rings.The 30mm have 4 screws per ring,come with +/- o,5,10 sets,for turn in and the Z rings for the Picanny rail.I recently shimed my rear base .015,and no worries about binding on the scope.
I have them on all 3 of my scoped non-AR centerfires. The Signature Zee rings should work just fine on a Piccatinny rail.Quote:
Originally Posted by geargrinder
I know that they work.
I just wish that they would make the mount a little more beefy. They don't have enough bearing surface for me and the cross pin is very small.
I would like them to make an XTR style ring in the Signature series.
I have them on 9 or 10 rifles from 22 to 300rum and they have never moved and never marked a scope for me, the 300 rum does have the 30mm rings with the 4 screws on the caps (300 shots)but it used to have the 1" for about 100 shots with no problem, the 1" rings were fired with and without a muzzlebrake so I have complete faith in them.
[quoteI would like them to make an XTR style ring in the Signature series][/quote]
me too the xtr's are bada-- looking rings can you say STOUT :o
solved the problem of scope movement on my 300 WSM. Have them on several rifles now.