My .270 win build

Printable View

07-06-2011, 01:03 AM
AKShooter

My .270 win build

Finally got my .270 together and nailed a load down for sheep hunting this fall. Thought I would share. I have come to love h4831 for the .270win, great speed and accuracy.

Gun started life as a plain 111

111fhns
Mcgowen 24", stainless matte, 11 degree crown, magnum taper
SSS recoil lug
Stockade roll over thumbhole stock
Nikon Monarch 4-16 mildot
Bedded by me.

Load consists of
Win case
Federal 210
62.0 grains H4831sc
130 hornandy sst
2.780 length to ogive
3200fps average

[img width=600 height=450]http://i740.photobucket.com/albums/xx43/71Chevy4speed/bc51479c.jpg[/img]

[img width=337 height=450]http://i740.photobucket.com/albums/xx43/71Chevy4speed/0bf757ba.jpg[/img]

[img width=337 height=450]http://i740.photobucket.com/albums/xx43/71Chevy4speed/3fdf7ce7.jpg[/img]

[img width=337 height=450]http://i740.photobucket.com/albums/xx43/71Chevy4speed/d9d59b53.jpg[/img]
07-06-2011, 01:50 AM
brtelec

Re: My .270 win build

Wow! That is a good shooting rifle and good looking too. I have used quite a bit of H4831 over the years and have found it very consistent even from lot to lot.
07-06-2011, 08:29 AM
TonyBen

Re: My .270 win build

Wow! That's gotta be a flat shooter! Nice setup!
07-06-2011, 10:20 AM
BoilerUP

Re: My .270 win build

Nice lookin' stick...but wow that seems like a hot load. No pressure signs?
07-06-2011, 01:19 PM
AKShooter

Re: My .270 win build

Quote:

Originally Posted by BoilerUP

Nice lookin' stick...but wow that seems like a hot load. No pressure signs?

Thanks,

Load is actually in book spec hornandy list 62 grains as max with the 130 sst, most books stop around 59 or 60 for 130s, ive also noticed that win cases seems to have a little more case capacity and federal 210s are a little cooler & softer than wlr primers, so between the combo it works, no cratered or flat primers, 3 hot charges on brass showed no seperation when I cut into the brass. Just a perk I guess that it's about 100fps faster than hornandy lists. :)
07-06-2011, 01:38 PM
BoilerUP

Re: My .270 win build

Thanks for the info!

I guess I shouldn't say much, I loaded a ladder up to 59.5gr H4831SC with 150gr SGKs for my 270...other than my shoulder being sore I never saw anything worse than VERY slight bolt lift & ejector swipe.
07-06-2011, 02:56 PM
jinx-)

Re: My .270 win build

Great looking stick you got!!! I have Savage 111 in 270 WIN, factory barrel it loves 140 gr SGK and 50gr H4350 0.25"@100 yards.
07-06-2011, 03:31 PM
nsaqam

Re: My .270 win build

Quote:

Originally Posted by BoilerUP

Nice lookin' stick...but wow that seems like a hot load. No pressure signs?

It's not difficult to get a 130 to 3200+ in a 24" 270 with any number of powders.

If you want to see some eye opening 130 numbers check out Magpro.
07-07-2011, 09:23 AM
jgerrington

Re: My .270 win build

I think hornady looks at the case and other things for pressure signs instead of testing for actual pressure. that's why their loads are hotter than most books..