Just picked up a used one to replace my stock on the 12 fv.....how is everyone keeping the blind mag in place......thanks a and happy new year
Printable View
Just picked up a used one to replace my stock on the 12 fv.....how is everyone keeping the blind mag in place......thanks a and happy new year
I'm assuming you're using a centerfeed rifle. What I did was make shims on a build. I used a coke can, cut out pieces and used shims to hold the magazine in place.
Center feed 4.4 top release ....savage 12 fv. 223........I was thinking of using epoxy but I may use the stock to switch from 223 to 6 x47 lapua I sent an email to choate but I'm not holding my breath for an answer.......I may try some JB compound
That's odd,I dont have the choate but my brother bought one he actually had to do a little dremel work to get his in. it fits now just as snug as the plastic one did might be his was undersize a little dont know..I used the b&c medalist and it virtually just snapped in it..I have heard of people useing cardboard on the sides to shim it up there and help hold it.
I bought this used the mag well area is huge and it does not look modified........the action fit perfectly it shot fantastic but bolt hangs up on the mag......weight of stock holds it in place but it wants to ride up......
I pinned it front to back then squeezed silicone on the sides seems to be good will try it out this week