Finished my 300WM, Thanks Mr Jim@NSS
I traded a set of cyl heads for a Savage 110 7mag, ordered a 300wm barrel from Northland SS and put it on after i got it threaded for the muzzle brake (waiting on a suppressor :D)
It was lonely without its scope...
[img width=600 height=450]http://img.photobucket.com/albums/v459/nonnieselman/Shooting/300ns.jpg[/img]
Shrewd Brake
[img width=600 height=450]http://img.photobucket.com/albums/v459/nonnieselman/Shooting/300brake.jpg[/img]
On the way home from work yesterday we stopped by the range to test some different loads and run them over the chrono..
Traded a nitrous kit for the scope :D
Millet LRS 6-25x56, 20MOA EGW Base, TPS 35mm Rings, Rifle Basix trigger, Factory Savage 112 300wm 26" Barrel, NSS Heavy duty recoil lug, Choate US stock.
[img width=600 height=450]http://img.photobucket.com/albums/v459/nonnieselman/Shooting/300OB.jpg[/img]
300yds
Best group was 1.625" with a 210gr Berger, 71grs powder, Win LR, 2750fps.
Worst group was 2.5" with 72grs.
[img width=600 height=450]http://img.photobucket.com/albums/v459/nonnieselman/Shooting/300yds.jpg[/img]
Got a 600yd match Saturday so i gotta hurry up and work on a load that will do 1.5" or less at 300.
Re: Finished my 300WM, Thanks Mr Jim@NSS
3750 fps with 210 berger ?
Re: Finished my 300WM, Thanks Mr Jim@NSS
Thats what the Chrono said and its a couple grains under the max load..
Re: Finished my 300WM, Thanks Mr Jim@NSS
just seams high to me
the last 300wm i had i could push a 150 nbt at 3600
with a max load of h1000
Re: Finished my 300WM, Thanks Mr Jim@NSS
Maybe 3150. But not 3750. Check it another chrono
I could only get 3250 in a 300 rum and 208 amax. And that was HOT
Re: Finished my 300WM, Thanks Mr Jim@NSS
Nice rig, Should be a good long range deer gun. Judging by your picture, setting the Chronograph in the shade is probably giving you messed up readings. 3750fps is impossible in that set-up.
Re: Finished my 300WM, Thanks Mr Jim@NSS
Brain Fart!!!
2750fps... i didnt even pay attn to what i was typing... ::)
Sorry guys..
Actually i was just checking to make sure you guys were paying attention... Good job!
;D
Re: Finished my 300WM, Thanks Mr Jim@NSS
Shot again yesterday, seems the average is 1.75" at 300yds.. ill take that anyday, but would love to have it closer to 1.5".
Average velocity out of 60rds is still 2750fps.
Re: Finished my 300WM, Thanks Mr Jim@NSS
Good looking rifle, shooter and lots of luck.
Re: Finished my 300WM, Thanks Mr Jim@NSS
Quote:
Originally Posted by lucy123
Good looking rifle, shooter and lots of luck.
I been workin on the load some more and managed a 2.5" and a 1.5" at 600yds.
[img width=337 height=450]http://img.photobucket.com/albums/v459/nonnieselman/moto_0196.jpg[/img]
Perfect evening for load testing, no wind, very very little mirage goin straight up.
Now if it will just keep doin that i will be happy!!!