At what magnification do you have your magnification set for correct MOA setting since this Primary Arms scope is not FFP ?
I looked in the manual but did not see anything.
wll
At what magnification do you have your magnification set for correct MOA setting since this Primary Arms scope is not FFP ?
I looked in the manual but did not see anything.
wll
I don't know about a Primary Arms scope, but usually the subtensions on a SFP scope are only accurate at full power.
No experience with Primary Arms either- but on the Nikon Buckmasters 4.5-14x40, the mildots are accurate at 12 power; the 12 is etched in red and beneath it is etched "Mil". I'm thinking the thing to do is peruse the Primary Arms site OR give their tech group a buzz.
Brian
I would venture to say that if it does not say anything then any degree of engineering went into the distances and it is all for looks. This is an excerpt from this review(http://www.thetruthaboutguns.com/201...minated-scope/)
"The scope also has some markings on the reticle, but Primary Arms says that they’re not calibrated to anything that they know of (not mils and not MoA)."
That review is for the 3x9 that was junk, not the 4x16 or 4x14 FFPQuote:
Originally Posted by stangfish
wll
16x
He said 16x is the power to use the MOA info correctly.
Emailed him about an hour ago, and he got right back to me ...great customer service !
wll