I have a single shot 112 action, and I'm looking for a different stock. Will the action drop into a stock that has a blind magazine built for a staggered feed?
Printable View
I have a single shot 112 action, and I'm looking for a different stock. Will the action drop into a stock that has a blind magazine built for a staggered feed?
It should......... both are long actions so the screw spacings will be the same......will just have some extra "storage space" where the mag box would have been. If you have the 3 screw Target action then you will probably have to epoxy fill the mag well cut out and bed a pillar for the middle action screw.
I have a 112R which should be the same as your 112S (R for repeater and S for single shot) and mine will fit any Long Action Staggerfeed Stock. Since yours is a Single Shot, yours will fit almost ANY Long Action Stock because centerfeed and staggerfeed guns both use the 5.062" center-to-center bolt spacing. Just measure your screws and if they are 5.062" then order up the Long Action stock of your dreams.
You'll probably have to open up the barrel channel for your heavier barrel.Pretty sure 110's are sporter barrels.
I'm looking at an aftermarket barrel that has a barrel channel cut for a heavy/varmint barrel