Higher comb needed on savage FLCP-k with accustock
My scope combo is high enough that I don't have a cheek weld. I want to put something that I can adjust where it needs to be. I am not really a fan of the cheek pieces that saddle the stock, those seem to push you off the center of the rifle. I was trying to find one of the cordura ones that lace on the underside of the stock and you can add the amount of filler that you need. have any of yall seen these? I can't seem to find the one I am looking for. I am going to talk to the lady that fixes my horse blankets and see if she can make me something if I cant find something.
If I have her make me one I want to have her make one with a pocket for an extra mag.
Thanks~!
Jake
Re: Higher comb needed on savage FLCP-k with accustock
Quote:
Originally Posted by
davemuzz
Does it move you very much off center of the stock? What cover do you have over it?
Re: Higher comb needed on savage FLCP-k with accustock
I did order the lefty, the pictures they had were all right hand but the description had left. I'm going to try just this and the build up under it and if it doesn't work I will get a Karsten.
Re: Higher comb needed on savage FLCP-k with accustock
Quote:
Originally Posted by
ODA 0121
Karsten's have been around for several years now, if you are handy you can easily make one yourself with some kydex a jigsaw, sandpaper, drill and heat gun.
What I've done because of issued rifles is simply cut some ensolite foam layers and and use some gaffers tape. Size it for you and you have a fine cheek weld.
The foam under the cheek piece is how I'm going to try it first, then go the plastic riser if I need to. But I'm not paying $ 60 for the Karsten when I can make it
Re: Higher comb needed on savage FLCP-k with accustock
I did build mine up under the tactical works stock cover which by the way is a very nice piece. I just used two layers of 3/4" felt off an old saddle pad and I like it. I ordered some 0.187 kydex to make something permanent and then I will put the tac works cover back over it with some 1/4"felt or neoprene between it and the kydex for a slight bit of padding.
Re: Higher comb needed on savage FLCP-k with accustock
Dang I wish i would have seen that before i ordered the plastic. I may get one of those.