Help! Have tried 5 different factory brands of 260 rem. all shoot 2"+, just bought 4 different bullet's from Midway, does any one have a recipe to help this Newbe?
Thanks in Advance Mike in Biloxi
Printable View
Help! Have tried 5 different factory brands of 260 rem. all shoot 2"+, just bought 4 different bullet's from Midway, does any one have a recipe to help this Newbe?
Thanks in Advance Mike in Biloxi
Easy big guy. What brands and loads did you try? We need a little more info. Also did you double check your scope and mounts? Is your barrel freefloated?
Earl
I have tried the following factory loads, Fed. Premium in 120 & 140 remington premier tip 120's , remington Core lock 120, nothing consistent...
I am bench shooting 100 yards, Scope recently came off my AR which shoots 3/4" all day.
Rings are leoupold and are tight as is the stock/action screws. Rifle is new...
I am hand loading Berger VLD 130 target and 140 Hunting VLD along with Lapua 123 HPBT and Hornady A-Max 123 Any info on loads would be helpful...
Thanks
Mike S
38 grains of varget with 120 Amax shoots little tiny groups in mine. Its a little on the slow side but it shoots fantastic right there. I think I was getting excessive barrel whip with higher end loads throwing my groups out. Slow it down a bit and see what happens. Also make sure your tang is floated as well as the barrel.
Sort of obvious statement, but if they all shoot 2" high, then you just need to adjust your scope.Quote:
Originally Posted by mikeooa
Now to be fair, they are all shooting 2" high compared to what?
Fubar i thik he means 2+ inch groups. I got to go with Stomp on this one. Slow it down a little. I prefer RL-15 over Varget but know folks that have had excellent results with Varget. Start low and work up. The best load is seldom the fastest.
I've been shooting a 139 gr Scenar over 46 grs of H-4831sc at the range. Shoots one ragged hole.
Range report; Sav. Model 10 Predator
loaded 140 berger with RL-15(35 grains) shot nice tight 7/8" groups, also loaded 123 Hornady A-max with RL-15 (36grains) grouped nice under 1" problem solved. Thanks for your assistance guys!!!
Happy Mike
Similar results with mine and 120AMAX and 140 Berger VLD. It tightened up at about 43.5 grain. Going up to 46gr didn't really increase velocity much so just saved the powder.Quote:
Originally Posted by WV338
Mike in Biloxi;
Where do you shoot?
Private range in Long Beach, also the local rifle range in Biloxi nice set up only go out to 300 yd's
I shoot at the Pascagoula Shooting Club in Moss Point. Are you familiar with it?
Mike what did you change? I have recently purchased my 1st reloading kit from Lee and as of yet have no experience trying for pet loads. i'm curious what you think was going on to cause your large groups.Quote:
Originally Posted by mikeooa
Just use H4350 for 120s -140s. 45gr with 120gr standard cup and core type bullets will get you atleast 2900fps and .5"groups. My experience with 5 different 260s. 120 Amax is doing a little faster than 2900fps.
43.5gr does well with 140gr Amax.
Is this the range with 1000 yard targets? if yes I want an invite! please. We worked in the general vicinity of this range for several weeks and never had a chance to stop and visit.
call me 228-324-3774
Mach2,
The only thing I changed was I quit using factory loads, I loaded Berger VLD 140 with RL-15, COAL of .280, this load is now shooting sub moa. Also loaded Hornady Amax 123 and Lapua 123 they all shoot sub moa, I use a cheap ($250) but very nice Mueller 6x32x44 target scope and installed a BASIX trigger that I got from Jim Briggs NSS. Love my Savage Model 10 .260
Mike,
Yes, this is the 1000y range. We do new member sign ups every other Sunday.
The 1000y stuff is only available for use during matches due to safety issues. You can't see that end of the range from the pistol line and comms are sometimes iffy out there. We do have a 600y range that you can use when get qualified on the long range side. We do however have steel targets going out to 600y that anyone can shoot.
The pistol side (short side) is 200y and you have to bring your own targets.
Memberships are yearly and run from Apr 1st to Apr 1st.
Check out the website & forum at www.pascagouladcm.com
BTW, there will be a 600y benchrest match on Nov 18th. I'll be working so I'll have to miss it. You are welcome to come out though. All the matches are open to the public.