Re: 11 308 accuracy issues
Bedding can be an issue, is it free floated? 4"@100 that's more like the barrel issue... Check you muzzle crown, insert q-tip and check if it traps cotton, the chamber can be misaligned with the bore, but there is noway you can check it unless you have lathe and indicator rods, it could be missing riffling if you can get hold of borescope then look inside. I would recommend another barrel, there are plenty custom barrel for small shank also different stock, however I did bed my 111 synthetic stock and it works great. Oh yeah, try another scope, just to make sure, Nikon no longer made in Japan...
Re: 11 308 accuracy issues
call savage and maybe they willl swap barrels on it. u may have gotten a bad tube.
brian
Re: 11 308 accuracy issues
oh one more thing. have u checked to be sure the front scope mount rail screws are not bottoming out on the barrel if they are too long. u could have put the ones that are supposed to go in the back in the front? if they were that would mean the rail is loose and moving on every shot.
Re: 11 308 accuracy issues
95% of accuracy issues are scope related. Just because the scope is new or it is a name brand doesn't make it good, try another scope. (Heck try what came with the rifle.) You said you check you mounts and that they are all tight, but they may not be tight. Many aftermarket base makers include screws that are too long, and they bottom out against the barrel before they ever get tight. Double check the length of the screws, just because they tighten up when you turn the wrench, doesn't mean they are tight. Make sure the action screws are tight, loosen them and re-tighten them.
Re: 11 308 accuracy issues
Thanks for the ideas. Will give the q tip a try. It's not the scope, mount or rings. Rifling looks good. I would love to install a nice barrel but I don't want to drop another $400 into this rifle.
Re: 11 308 accuracy issues
400, well you talking Brux barrels, for 250 get McGowen. How do you know rifling looks good, you could have a bubble, if you do a pass with tight patch, is there a spot where it skips? I had 11 BTH in 308 with smooth nut, it did almost the same, I got it bedded got new crown, it did improve just a bit but still was more then 1.5", well I sold that thing quick...
Re: 11 308 accuracy issues
Yeah...
1) the crown for sure as already mentioned.
2) Check the barrel for free float all the way to the barrel nut.
3) Check to make sure the tang is free floating as well.
4) IF all that has check out.....then I would pull the barreled action out and double check the recoil lug area to make sure there's no "stuff" there so that the recoil lug is making full contact with the stock. Then put it back together....make sure the gun is unloaded when you do all of this (of course)....and when you reinstall the barreled action, point the rifle to the sky....then lightly snug the action screws.....then tighten the front first and the rear last. If you have a wooden stock....I believe the torque setting is 65 in\lbs. For plastic I believe it's 45 in\lbs. For sure you should have a in\lbs torque wrench.
I made this mistake of not reassembling my 6.5 Swede correctly and got some scratch my head groups until I did it right.
DAve
Re: 11 308 accuracy issues
Spend some time troubleshooting it first including trying a 2nd scope. I assume that you are talking three shot groups and not heating up the light barrel? If that doesn't work call Savage before you do anything permanent to it. They fixed me up when my model 11 in 308 would not shoot, even paid shipping both ways. They did have it for almost two months but I was pretty happy with it after I got it back.
Just seems to be something about the light Savage barrels that we have more trouble with compared to the heavy Savage barrels that almost always shoot really well.
Keith
Re: 11 308 accuracy issues
Got the front lug bedded. Milled out nearly all the way around the lug and about an inch in front. See what happens this weekend
Re: 11 308 accuracy issues
Sounds like a good plan! (Not just a plan....but a good one!!!) Let us know the outcome. ;D
Re: 11 308 accuracy issues
Hi,
Just for giggles try shooting your rifle with the front bag only and not the rear one. I tried this the other day with my non Accustock tupperware stock and it seemed to really help. I'm in the preliminary stages of this but the couple of groups I shot without the rear bag were better. I have a bull type bag up front and a leather rear bag. I'm assuming my combination of bags are putting the stock in a bind during recoil.
Jeff
Re: 11 308 accuracy issues
went out and shot it today. It sucked. One shot would be dead on (accident I am assuming) the others not even on paper. So I am going to go through every screw on the mounts and see if I missed something, then I am going to swap scopes to one I know for a fact works.
Oh, and the accutrigger blade sticks, if I can't get it to shoot with a new scope I am sending it back to savage.
Are ER Shaw barrels worth the money. I see that midway has the 308 barrel kits for $200, I just don't want to spend much on this rifle as it is meant to be a deer rifle and occasional varmint gun. http://www.midwayusa.com/viewProduct...tNumber=631834
Grrr. With what I am spending in ammo to try to get it accurate I almost could have bought a much better gun.
Re: 11 308 accuracy issues
You will probably find that the problem is not the barrel.
Re: 11 308 accuracy issues
Shelby,
I had an old savage do that on me. I put leupold mounts on it and a nice 6-18x50 simmons and couldnt get it to zero for the life of me. And i reload. So i played w the mounts and still nothing. I finally hooked up my boresighter and moved the adjustments while looking thru it and it moved all crazy! I played with it some more and low and behold i found the scope adjustments were crazy messed up! I sent it back to simmons and they sent a newer one of a diff model but more magnification because they stopped making the one i had.
Test the scope adjustments to make sure they are holding.
Brian
Re: 11 308 accuracy issues
Well, I only got to shoot at 50y but it was remarkedly better. I don't know if it was the scope or something was tweaked wrong. Going to try again next week with the new scope, if it works then I will give the nikon another try, then I will know what is going on.
Re: 11 308 accuracy issues
I bought prostaff for my muzzleloader it was on sale in Cabelas last year 89.99, before I had Tasco which I busted when I drop it from treestand, well with Tasco I could group 0.85"@100 and with prostaff it was like 5" - 10", I send that thing right back for replacement, got new one and 0.85" again...
Re: 11 308 accuracy issues
well, with my HM2 it shot just fine, if it is the scope it is recoil sensitive. What drives me nuts is the first shot would be right on and the next might not even be on paper.
Re: 11 308 accuracy issues
I have buckmaster 6-18X40 and I think it might be defective as well here what it does @ 300 yards first shot dead on center then the rest of the group...
[img width=600 height=441]http://img835.imageshack.us/img835/7748/6mmnorma20.jpg[/img]
but I think its the barrel, just cold shot then the rest of the group, I had it on 308 and 223 never failed me before
Re: 10 308 accuracy issues
OK, IDK WTF is going on. It shot good with the new scope, then it shot REALLY bad. I thought it was grouping tight, at 50, but it was off the paper. I have sighted in many rifles, something is up. I think it has issues with heat also, two will be decent and the third will be WAY off. The trigger is screwing up also. About one in five shots it will "click" and lock up, no primer strike, have to cycle the bolt.
So I haven't a clue, but I think the gun is bad, but it could be both. Either way I am returning the scope and calling savage. I have spent to much ...... money on ammo to put up with it.
at 50 yards, my 22/45 out shot the savage. open sights. ten shots under 6 inches.
Re: 10 308 accuracy issues
If you dont pull the blade straight back it will lock out the trigger,it is a sfaety feature. You have to position your finger so you are pulling straight back and it should operate correctly. Is it possible the barrel is loose. I have seen this before. If you have a local smith with a wrench for the smooth nut,I would have him check to see if the barrel nut is not tight enough , which will cause the problem you are having.
Re: 10 308 accuracy issues
Quote:
Originally Posted by shelbyfan
I am returning the scope and calling savage. I have spent to much ...... money on ammo to put up with it.
That's probably your best plan. I'm sure with enough time, you could probably figure out what the issue is....and then your still gonna have to send it back to Savage to tell them what the issue is....and then they will look at it....figure out you are absolutely right....fix it...and never tell you that you are 100% on the money that your diagnosis was correct.
So why spend the time? Heck...your not getting paid to do that!!! Send it back and tell 'em to turn the lemon back into a rifle.
Last fall I bought a T\C 220 Swift from the (now temporarily shut down until they get the custom shop moved) T\C custom shop. I "burned" way to much time and probably 100 rounds.....along with the fact that each time I pulled the trigger.....even on brand new Nosler brass, I would the "magic ring" of case head separation. Yeah....do the cost factor.
I determined the barrel had been overbored by about 15 thousands. I sent it back to T\C and about two weeks later they called me and said "The barrel is not within our standards."
Yeah....just send it back. Good plan.
Dave
Re: 10 308 accuracy issues
so I finally got out to shoot it again. Set up a 25y target, got it shooting about 2" low, moved it to 50y. Shot 10" low >:(
so I said "screw it" and ordered the ER Shaw SS barrel kit and a boyds prairie varminter stock.
Re: 10 308 accuracy issues
so it is barrel, just what I suspected, all my latest factory barrels are bad...
Re: 10 308 accuracy issues
Quote:
Originally Posted by shelbyfan
so I finally got out to shoot it again. Set up a 25y target, got it shooting about 2" low, moved it to 50y. Shot 10" low >:(
so I said "screw it" and ordered the ER Shaw SS barrel kit and a boyds prairie varminter stock.
what did it do at 100? i would be welling to bet that it comes back up from 50 to 100 but the shaw is a good barrel so its no big deal