Re: 112 Long / Short action
The bolt stop is called the front baffle, and can be cut to the length you want or you could buy the right one for maybe $10.00. This part is separate from the bolt head.
If you want a repeater, it would be cheaper to start with a used long action in regular or magnum flavor. Maybe you could swap what you have with someone, or just buy a used rifle for a few bucks.
If you can live with a single shot you can use what you have.
Re: 112 Long / Short action
My 338 Edge is built on a similar action, but mine started out as a 308. I'm using mine as a shingle shot. When you get your magnum bolthead just order a regular front baffle to go with it. Then you will be able to pull the bolt back far enough for plenty of clearance. Here's a couple pictures. Post up if you have any more questions.
[img width=600 height=356]http://i234.photobucket.com/albums/ee269/geargrinder123/S8001327.jpg[/img]
[img width=600 height=450]http://i234.photobucket.com/albums/ee269/geargrinder123/S8001620.jpg[/img]
Re: 112 Long / Short action
Thanks for the replys. That pretty much confirms my thoughts; leave the receiver alone. Thanks for pointing out that it's called the baffle, SSS sells them for a few bucks, but without a pic I never would have known. Is there any value / advantage to using one of the single shot adapters like SSS has? I see your pic looks like the original mag follower. @ Geargrinder, do you go by the same name on LRH? I recognize your pic. I've been lurking here and there for a while, just signed up under the name "Vulture" over there. Thanks again.
Re: 112 Long / Short action
I made an Edge repeater once and really didn't like making the permanent mods to the action. I might decide to use this action as a .204 Ruger repeater. With this action I still can.
I've since put in a single shot follower. It worked fine without, but it looks better with it in. It probably aligns the round better, but I never had problems feeding.
Numrich, Midway, and Brownells also stock the boltheads and baffles. I try to steer clear of SSS for parts, or anything I can get somewhere else.
Yes, that's me. Here and LRH are the two places I spend the most time.