-
Trigger Adjustment
I just got around to stripping down the new .270 110C that I recently bought used. DOM is 1974 and after cleaning the rifle is slam firing when I close the bolt. It didn't do it proir to cleaning. I just blasted the trigger assemby with gun scrubber, so I did not move any of the screws.
My question is, can someone point me to documentation on how to adjust the trigger and tighten up the trigger. If I close the bolt very easily it won't fire and the trigger is noticibly lighter. Just would like to know how to adjust it or should I take it to a gun smith? I was going to take it to the range tomorrow and fire it, but not now. Thanks for any help!!!
-
Re: Trigger Adjustment
Do some searching on this site as there are instructions for adjusting the three screw triggers. Not hard just need little patience and time too get it right.
-
Re: Trigger Adjustment
I have the same trigger as in this thread http://savageshooters.com/SavageForu...c,37386.0.html can it be adjusted? If it is a decent trigger I'll keep it, if not I'll do an after market.
-
Re: Trigger Adjustment
On search i found this link and I think this is all I need! http://savageshooters.com/SavageForu...pic,510.0.html thanks for the moral support!