Just picked up a Savage 110 Apex Hunter in 6.5 Creedmoor. Looking at putting a Harris bipod on it. Any recommendations, or thoughts on which one to get??
Thanks,
Tim
Sent from my E6910 using Tapatalk
Printable View
Just picked up a Savage 110 Apex Hunter in 6.5 Creedmoor. Looking at putting a Harris bipod on it. Any recommendations, or thoughts on which one to get??
Thanks,
Tim
Sent from my E6910 using Tapatalk
I found a harris clone that is everything the Harris is, the only caveats was I had to buy some grade 8 bolts, tap a couple threads, a drop of loctite (maybe $15 worth of parts) and this think is as solid as any ive used at a fraction of the cost
Sent from my SM-N975U using Tapatalk
A Harris 9-13" BRM, benchrest bipod, [about 95 usd]get a pod lock{about $11] if shooting off a Hard Surface,Get Bruce Pyatt's, Bi-Slide Aluminum Feet [ about $24] the BTM Models Can Pivot left & right,if your on uneven ground they . attach to sling swivel
No they are not but when you look at better glass there is a difference . I still got a displaced banner , as I got a 783 and tc compass wearing trophy’s scopes now
Sent from my iPhone using Tapatalk
Mine came with the Vortex Crossfire 3-9x-40. So somewhat decent I believe.
Sent from my E6910 using Tapatalk
I would recommend looking at the features. I also have a Harris and a clone and can't really tell the difference in use.
I like the notched legs and swivel top (for tilting). I have not ever needed the rotating top.
Height. Both of mine are 9-13. 9" is almost too high for bench so I'd probably be better off with 6-9. But, 9 is too short for prone so if that is on your agenda then get the 9-13.
Harris 6-9 SBRM is the way to go until you can drop the coin on better.
Sent from my SM-G986U using Tapatalk
Like i mentioned, I just replaced the screws on mine and a dab of loctite and she's held.up stable and perfect to 6.5 creedmoor and 308.. mime was like jinse brand something like that. A buddy had one and i like it so decided to try it
Sent from my SM-N975U using Tapatalk
Mine are caldwells
Sent from my iPhone using Tapatalk
Interesting I haven seen one in years . Mine didn’t have the knotched legs
Sent from my iPhone using Tapatalk
This UTG pro bipod is a great product. Short and long shown,
https://leapers.com/images/600X381/TLUBP02_A.jpg
https://leapers.com/images/600X381/TLUBP01.jpg
Accu-Tac are really good, but plan on $$$$. I don't like Harris because of the external springs that pinch your fingers. There are a ton of reviews on Youtube which should really confuse you.
https://www.youtube.com/results?sear...y=bipod+review
I have some Harris pods, but also several Blackhawks.
I really like the pivot/traverse features- much faster getting on target and less effing around. Just get the legs "close" on uneven surfaces and you can swivel/level the rifle as needed without fiddling with the legs to get it correct. I can pivot from one steel plate to another at range without touching the bipod.
https://blackhawk.com/sportsters-traversetrack-bipod/
9"-13" is way too tall for bench shooting- may be OK for prone depending on the individual (or tall grass) but 6"-9" works for me in both applications.