Originally Posted by
n4ue
The 'best' way to modify the Axis trigger (IMHO), since I done all 8 of mine, is as follows:
Remove the factory spring
Replace it with a 10-24 Allen setscrew 3/4" long
Get a spring that slips over the setscrew, it will be captured by the setscrew and the dished part of the trigger
Both the screw and a nice long, light spring that you can trim for the desired pull are available at True Value for less than $1, total.
Not only will you have a light, safe trigger, you can adjust the screw to eliminate all over travel.
I also have 4 M12s with Accutriggers and both myself and my shooting buddies prefer the modified Axis triggers to the Accutrigger.....
To each his own, I guess....
ron