Printable View
I have a .223 that wont fully eject a round about 75% of the time. It will come out about half way and drop it in the front part of the magazine. I thought it was hitting the front of the magazine lip but it still does it with no magazine in at all. Is this a common problem?
A couple of thoughts:
A. Have you tried the replacing the extractor detent ball with a 9/64th (~.140") ball?
Sometimes the problem is the extractor.
B. Also, have you really cleaned out your ejector? There could be gunk that is making it stick and not extend its full length.
All the best