I would like to look at making my 22-250 to a 308??? I have a Stevens 200 rifle, any input is appreciated.
Printable View
I would like to look at making my 22-250 to a 308??? I have a Stevens 200 rifle, any input is appreciated.
Hiya
all you need is a new barrel,barrel wrench,action clamp and headspace gauge.I made an action clamp from two pieces of bar stock and bored a 34mm hole through them.
MARK
Thanks I am looking into those items now. Any suggestions for a barrel? Where to buy?
You can go use or new factory or aftermarket
give sinman or northland a call
go to the sponsors page
both are great to deal with
do not forget a new recoil lug
+1 on replacing the stamped factory recoil lug.
I have a heavy stainless 26-inch .308 barrel from a model 12 and I want to switch it out to an equivalent 22-250. The bolts will work on either.
yep
i was actually thinking of changing my 22-250 to a 308. i've been in contact with Sharp Shooter Supply and they said if i sent them my rifle they would replace the barrel with Douglas barrel, new bolt head and put everything on for $425.
All you need is a barrel and optional recoil lugQuote:
Originally Posted by 11fcns
so a new bolt head isn't necessary then?Quote:
Originally Posted by sinman
A new bolt head is not necessary
Nope not needed
What about magazine differences?
The magazine is also the same
Do it. Don't hesitate. I have a 12BVSS that i waited and waited for until I found one in .308 and glad I did.