Need some help with model 10 FCP McMillan measurements.

So I have a model 10 McMillan on order, but it looks like it is going to take a couple of weeks to arrive. In the mean time I am shopping around for a bipod. I have pretty much settled on the Atlas BT10-LW17. My main question is can somebody take a measurement between the two sling studs on the forearm of the stock, so I can figure out which length rail I should get (3.5" or 4") Also, If anybody has mounted one of these bipods on their rifles I may have some other questions for ya.

I have a Mcmillan A3 stock and the front studs are 3" on center. I just put an Atlas on mine and used the BT17 rail that will work on 2.2 to 3.5" spacing.

You will love the Atlas.

Quote:

---

Originally Posted by kingzero

I have a Mcmillan A3 stock and the front studs are 3" on center. I just put an Atlas on mine and used the BT17 rail that will work on 2.2 to 3.5" spacing.

You will love the Atlas.

---

thanks. Did you have to get the rail fastener kit as well?

Quote:

---

Originally Posted by nickortizzle1035

thanks. Did you have to get the rail fastener kit as well?

---

No. If it already has 2 sling studs you will only need two 10-32 screws to secure the rail. I used black button head allen screws from a local hardware store.

Quote:

---

Originally Posted by kingzero

No. If it already has 2 sling studs you will only need two 10-32 screws to secure the rail. I used black button head allen screws from a local hardware store.

---

awesome. I am somewhat new to this. I am use to Milsurp rifles where everything is drilled directly into the wood. thanks for the help!