Chassis Build for Striker
I recently picked up another Striker and decided that this one was going to be a bit different. So I decided to build a chassis stock out of aluminum for it. It is still a work in progress, but here is what I got done today. (sorry for the crappy cell phone pics)
Here it is getting started in the vertical CNC mill.
http://i747.photobucket.com/albums/x...psfb1970a6.jpg
Here it has had the trigger and mag wells cut into it.
http://i747.photobucket.com/albums/x...psf8495840.jpg
Now with the barrel channel cut into it. It should have plenty of room to free float. ;)
http://i747.photobucket.com/albums/x...psfcca371c.jpg
And here it is with all the bedding area cut in, bolt handle notch cut, and the sear clearance cut into it.
http://i747.photobucket.com/albums/x...psfcc9bd97.jpg
That is as far as I got today as I ran out of time. I did manage to get most of the rest of the programs laid out in the CAD program to do the lower side so that will have to wait until next Saturday. I'll keep adding pics and info as I progress.
Thanks for looking.