Just purchased Savage 12 LRP in 6.5 Creedmoor.Will be mounting a Vortex Viper on it.Once I decide on mounts and rings.Any suggestions appreciated.I do reload also.So any recommendations on good loads appreciated.
Printable View
Just purchased Savage 12 LRP in 6.5 Creedmoor.Will be mounting a Vortex Viper on it.Once I decide on mounts and rings.Any suggestions appreciated.I do reload also.So any recommendations on good loads appreciated.
Warne is very nice quality.
I would go warne base and luepold prw rings myself
I've standardized recently on the EGW base and the Burris XTR rings. The last three builds I've done have all had the same combo, so if I need to, I can move scopes around pretty quickly. I haven't had a need to move anything, but the option is there if I ever need it.
I use the egw base(rail) and burris signature zee rings with the plastic inserts and it leaves no marks on your scope if you should have to take it out of the rings in the future. You can get offset inserts just in case something is out of alignment or you need more elevation up to 30moa is possible.
I have a Farrel base and Seekins rings on mine, both quality products. My load for my LRP is 41.7 of H4350, fed match primer, Scenar 139's and Amax 140's, speed is a bit over 2800. That was the first node in the ladder test, second was about 42.5. I also have a stiller action with a 26 in bartlein barrel and the load for it is 42.6 H4350 for the same velocity. Start low and work it up for your rifle.
Ken Farrel Base and Rings, bite the bullet and get them, nothing compares IMO, have used many differnet rings and bases of the years, and just recieved my first set of Ferrels yesterday in the mail.
It set of rings has its own serial number, you can call these guys up and they will help with any questions.