I have a Mark II trr-sr with scope mount from DIP. Cannot remember where I got my rings but I would like to change them out. Any suggestions? Thanks.
Printable View
I have a Mark II trr-sr with scope mount from DIP. Cannot remember where I got my rings but I would like to change them out. Any suggestions? Thanks.
Burris Signature Zee is the way to go.
Thanks J. Baker. Since I have the rail, is there a specific size I would need? I know the rimfire brand wouldn't work, so would I need the 1" Weaver Style?
That sounds about right, you wont need as high of rings since you have a rail, this is what I do, you rest your scope on top of the barrel over they action, like if there were rings holding it, and hold up the eye piece end so it is close to even as you can, and measure how much distance there is between the scope tube centre and the rail, and then just get the next size up, IE: 0.50 to center of scope tube then get they 0.65 or medium rings. easy as 3.14159265
http://www.burrisoptics.com/images/ring-heights.jpg
Dean
+1 Burris sig zee...
This is how I always end up with this end result.
[IMG]http://i1290.photobucket.com/albums/...psc36fde2c.jpg[/IMG]
Dean