A Way to Get a Wooden Axis Stock Target Stock
I was checking out Youtube, and came across a post of someone who had used an Axis rifle to build a competition rifle. He modified it from a 30.06 to a 6mm TCU, (necked-up .223 brass to .243), and was shooting < 1" groups @ 300 yards, and at 100 yards, could cover with a dime. He used a BSA CF2 stock, and modified it for the Axis action. I purchased one of these stocks, and almost have the action installed. It was a pretty close fit to start with. I'll have to change the mounting holes from 5" to the 4.8", and will probably do it with offset pillar blocks.
Here's the link: http://www.youtube.com/watch?v=brcEm6RE9kM
Gary