looking at getting the dnz scope mount does anybody know what height to get? I have a stevens 200 with a bull barrel the scope will be a 1" tube and 40mm
Will scope mounts for the savage 10 rounded work on the stevens 200 short action?
Printable View
looking at getting the dnz scope mount does anybody know what height to get? I have a stevens 200 with a bull barrel the scope will be a 1" tube and 40mm
Will scope mounts for the savage 10 rounded work on the stevens 200 short action?
You'll have bolt clearance issues if you go with a low.. medium height is pretty much the starting point.
DNZ Low on a round action Savage/Stevens, scope Sightron 1.5x6x42mm. I have no problem wth bolt clearance BUT I don't have a fast focus eye piece.
http://i6.photobucket.com/albums/y22...trailer008.jpg
Mine has more clearance than that.. and I have to let go of the bolt to work it.. thumb wont fit between. Depending on scope, I think it matters the width of the mag ring. I think that sightron might be even longer than my bushy elite 3200. Unless thats a 10? Mines a 110.. Flat rear, round front. I definitely cant cycle the bolt without hitting the lens protector.
http://i1106.photobucket.com/albums/...926_201533.jpg
http://i1106.photobucket.com/albums/...926_201612.jpg
thank you the nikon i'll be using has a large eye piece so i went with the med. hope they work
I have the low on my 116 with a 3-9 nikon. Barely clears, but it clears.
Sent from my ADR6425LVW using Tapatalk 2
I just mounted the low DNZ on my new 116 weather warrior (round receiver) with a Nikon Monarch 4-16x42. Everything clears including working the bolt as long as I don't have the factory Nikon scope cover on. It's tight but I like it.
with a med set of dnz on my axis with 10x40x50 1/8" space from obj. to bbl perfect for my set up