I know this is a dumb question. Is it possible to change a CF rifle to SF? I have a Stevens with CF and loading is PIA.
Deans
Printable View
I know this is a dumb question. Is it possible to change a CF rifle to SF? I have a Stevens with CF and loading is PIA.
Deans
I sold all my CF's for that reason, plus you can just toss in a round on the bench with a SF's. I feel your pain. I mean I felt your pain.
Nope.Quote:
Originally Posted by Deans
+1, the centerfeed receiver doesn't have the notches cut for the staggerfeed mag box.Quote:
Originally Posted by 82boy
You can take your reciever to a competent gunsmith and he will measure and cut the notches in your action for the staggerfeed box to feed. Bill's Custom Automatics in Shelby Ms has done a few and they work great. You can also get a stock inletted for a hindged floorplate with HFP bottom metal.
why is loading a PIA? I have no problem loading mine. You just push the bullet into the mag and voila! Don't see what the issue is. Now, finding stocks for it is a PIA.
or you can just change it over to a detachable box magazine
What all is involved changing to DBM? Will the box mag be SF? Also mine is a blind mag so there will be some alteration to the stock.Quote:
Originally Posted by pdog06
Deans
just buy the centerfeed DBM hardware(a set is even available in our classified section right now), and then either buy a stock for a DBM or send your stock to Sharpshooter Supply and have them inlet it for you for about $50.
Actually, you could get the parts AND labor both from SSS.