Savage 12 fclass in 6mmbr needs loads for varget

Gona use Varget in 6mmbr to do some reloading any preffered recipes and any problems with varget

I got my 1st 6BR here a couple months ago and everyone then was telling me Varget is the go to powder. I was shooting 58gr VMax over 31grs of Varget and shot a .331" 5 shot group while breaking in the barrel, so I have been playing with it since.

i have a savage F class(factory 30 inch bbl) that shoots .4-.5 groups at 300 yards with 30.4 varget and 107 smk 10 thou in lands with cci br primers.(as always work up to any load for your gun). my 28 inch criterion bbl model 12 likes 30.0 varget to get the same results at 300 yards and holding one half moa at 600 as well but with 12 thou jump. hope this helps .

I have 12 LRPV in 6BR factory 1:8 twist 26" bbl, I only use Varget and BR4 primers... with 105 gr A-Max and 29.6 gr Varget its 0.36" - 0.5" @ 100 yards and 2.34"@500, 105 gr Barnes Match Burners and 29.8 gr Varget its 0.5 -0.6" @100, with 100 gr Hornady BTSP and 30 gr Varget its 0.9" - 1.5" @ 100 yards, also I tried 87 gr V-Max and 29.6 gr Varget it produced 0.6"@100 yards

you would find more recipes here http://www.6mmbr.com/6mmbr.html

i have F class 6br start at 28 and work up see what it like best i found amax did well .010 jump at 29.4 but no two are the same.

30.0 grns give or take a few is usually the 6br ticket!