Was there ever such a thing as a 375 H+H length CF DBM rifle made
Was there ever such a rifle made....
Savage 375 H+H length CF small shank action, stainless with a DBM ??
Re: Was there ever such a thing as a 375 H+H length CF DBM rifle made
I don't know, but I'd like one please. I'm not too particular. If it's only blued, not stainless, that would be ok.
Good question!
Re: Was there ever such a thing as a 375 H+H length CF DBM rifle made
No....and you'll probably never see one. When Savage went to the center feed mags, they never intended to do H&H or RUM length mags, there is not enough room in the mag frame for the extended length.
Re: Was there ever such a thing as a 375 H+H length CF DBM rifle made
I have a related question for all you smart people out there. From what I read I think the answer is yes, but I'll ask anyway:
Did Savage did make controlled round feed in long actions (able to chamber 458 Win Mag)?
If so, were they Center or stagger feed? DBMs?
Re: Was there ever such a thing as a 375 H+H length CF DBM rifle made
In my CF long action it looks like there is enough room in the mag well and opening in the bottom of the receiver that if you cut out a slot in the front of the magazine box for the bullets to stick out of that there would be enough room for it to work. Be advised I haven't tried it yet but been thinking about it b/c it looks like there's enough room. Is that possible Sharpshooter?
Re: Was there ever such a thing as a 375 H+H length CF DBM rifle made
By CF, do you mean center feed (magazine) or Controlled Feed (action)?
Just want to make sure I don't misinterpret anything.
:)
Re: Was there ever such a thing as a 375 H+H length CF DBM rifle made
search for the Savage ALASKAN GUIDE , they come up every now and then
mine is 375 HH but they were made in other calibers
tjogre ;D
Re: Was there ever such a thing as a 375 H+H length CF DBM rifle made
My 375 H&H is controlled feed, standing ejector, stagger feed.
Re: Was there ever such a thing as a 375 H+H length CF DBM rifle made
there are a few on gunsamerica currently, not sure if they are cf dbm though
Re: Was there ever such a thing as a 375 H+H length CF DBM rifle made
By CF I meant center feed. Sorry for the confusion.
Re: Was there ever such a thing as a 375 H+H length CF DBM rifle made
BTW - wouldn't want a detach mag in a dangerous game rifle. Just saying...
Re: Was there ever such a thing as a 375 H+H length CF DBM rifle made
trogre, does your 375 have dbm, hinged floorplate or blind. My 116 FSS is blind stagger. By the way eric in nc I agree with you got 2 more 375s both have floor plates pinned as one would fall open once in a while with 300 gr full house loads.
Re: Was there ever such a thing as a 375 H+H length CF DBM rifle made
True about the detachable mags and hinged plates on the heavy hitters. Most I've seen that have them are either pinned as you said or I've even seen some with tape around the floorplate and bottom of the stock. Taped shut in other words.