SAV 1 TRIGGER FOR MY EDGE
I'VE JUST ORDERED A RIFLE BASIX SAV 1 TRIGGER FOR MY SAVAGE EDGE IN .223. I ADJUSTED THE FAC. TRIGGER BUT WAS NOT TOTALY HAPPY WITH THE INCONSISTENT RESULT. THE GENTLEMAN AT RIFLE BASIX TOLD ME IT WOULD FIT AND THAT THEIR SALES HAD GONE WAY UP SINCE THE EDGE CAME OUT. HAS ANYONE ELSE ON THIS BOARD DONE THIS AND WAS IT AN EASY INSTALL? I PUT A RIFLE BASIX IN MY MARLIN 917 AND AM VERY HAPPY WITH IT. I REMEMBER I STRUGGLED A BIT GETTING IT IN THOUGH.
DON
Re: SAV 1 TRIGGER FOR MY EDGE
there is a video on you tube where you can watch a guy do it from start to finish
Re: SAV 1 TRIGGER FOR MY EDGE
that would be great, i looked and there are a bunch about the edge but i cannot find any that mention the trigger installation.
don
Re: SAV 1 TRIGGER FOR MY EDGE
Yes, I put the Sav-1 in mine about a year ago. Easy install, easy adjustment, 2 lbs pull. You won't be disappointed.
Re: SAV 1 TRIGGER FOR MY EDGE
thanks Doubleup, i'm looking fwd to getting it.
don
Re: SAV 1 TRIGGER FOR MY EDGE
I agree with DoubleUp. I would like to point out though, if your not familiar with installing these make shorter turns on the spring adjustment screw and the sear engagement screw as you are getting close to the pull weight your after. I put mine in I tried going to quick, and made big turns on the adjusters and it made me have to readjust several times. Wasn't a problem to do, just took me more time.
Re: SAV 1 TRIGGER FOR MY EDGE
hanks for that jmason, i would have made the big turns also as i'm always quite in a hurry
don
Re: SAV 1 TRIGGER FOR MY EDGE
well, i got my sav1 yesterday and it's installed. it was a bit tedious, going back and forth, in and out of the stock. but it's in and works just great. just a bit over 2 lbs,no creep, almost no overtravel. i'm very happy with it. thanks for the encouragement, and helpful advice.
don
Re: SAV 1 TRIGGER FOR MY EDGE
That's great. Now go shoot some of those tiny little groups and give us an update.
Re: SAV 1 TRIGGER FOR MY EDGE
Just finished installing my SAV-1 trigger. It was my very first time doing anything of the sort and I have to say it wasn't that hard. But I did take the time to read up/youtube anything about the SAV-1 and Savage triggers beforehand, that made the job a whole lot easier. Can't wait to take it to the range. ;D
Re: SAV 1 TRIGGER FOR MY EDGE
RBT is the only way to go. After fitting the trigger my first 5 shots @50 meters looked like this, not bad!
[img width=600 height=337]http://i1237.photobucket.com/albums/ff463/jasta70/22072011329.jpg[/img]
Re: SAV 1 TRIGGER FOR MY EDGE
don't forget loctite!
Re: SAV 1 TRIGGER FOR MY EDGE
Makes the trigger pull 99% better ;D
Well worth the money and comes in easily.