Printable View
I was at the range the other day banging steel at 600+ yards with my M111 and then it wouldn't fire. Trigger pulls but no click. I saw a piece of metal sticking out of the trigger guard area, so I unloaded and when home. I pulled the trigger and the trigger looks ok but maybe the "sear" broke off. I have some photos I could send but I can't figure out how to upload them here. Any takers? Thanks in advanced.
I use the app tapatalk, it lets you directly upload photos.Quote:
Originally Posted by fishy81
Are you able to tell if it cocks when you lift the bolt?
Sent from my SM-N975U using Tapatalk
Bolt does not reset https://uploads.tapatalk-cdn.com/202...eb0dd83492.jpg
Sent from my iPhone using Tapatalk
https://uploads.tapatalk-cdn.com/202...8171e14686.jpg
Sent from my iPhone using Tapatalk
https://uploads.tapatalk-cdn.com/202...63bfb2d54e.jpg
Sent from my iPhone using Tapatalk
Looks like youre gonna need a new sear to me.
Yep, she's busted......first time I ever saw that.
Maybe someone tried to time the trigger..............Quote:
Originally Posted by sharpshooter
Nope just me shooting haven’t touch the trigger since the gun was new and I adjusted the pull
What’s the easiest fix?
Sent from my iPhone using Tapatalk
No reason for it to break at that spot, I'm guessing a defective stamping. This is a pretty rare occurrence.Quote:
Originally Posted by Robinhood
The easiest fix is a new sear.
Okay thanks I have an email pending with savage arms now since they aren’t taking calls during covid
Sent from my iPhone using Tapatalk
Look for a used sear, not sure if 3 screw and AccuTrigger sears interchange. You may have to do some minor fitting to get the new sear over the block. I think Savage will tell you to send the rifle in or that they only do trigger business through a FFL.
Robinhood or Shaprshooter can tell you if sears interchange. Last time I was looking, Numrich had sears.
Bill
Fastest fix would probably be to put a "wanted" ad in the classifieds for a complete trigger assy from someone who's upgraded. You can upgrade to a target accutrigger at the same time if you want.
I guess you guys didn't notice that is a bottom bolt release sear....
Taking it in to a gunsmith, this doesn’t look like something a novice should mess with
Thanks all
Sent from my iPhone using Tapatalk
That is exactly why I recommended Sharpshooter or Robinhood! I know nothing....... and especially about the plastic bottom bolt release.
Bill
I believe the sear broke! Could be wrong though...but I’d bet on it. LOL..:becky:
Yeah, unfortunately the bottom bolt release sears aren’t available anywhere. Difficult even to find them used as ALL aftermarket triggers, save for the Jard, use the stock sear. Perhaps you might find someone here who has purchased the Jard. If you can locate one used we can easily walk you through replacement online. Otherwise, yes...smith time. Perhaps you can locate one who will be kind enough to use some KY. :o:crutch:
Bill, You warm my heart brother but I have to be honest, I don't fit in the same sentence with sharpshooter when it comes to Savage knowledge and experience.Quote:
Originally Posted by bsekf
I would however contact Fred if i could not find the sear retail.
I can take mine apart and machine or cut one for you but It would take some time because of my work schedule.
Sent from my SM-N975U using Tapatalk
I believe Jard has worked out the kinks. If Fred can't help, I would try the Jard. New sear is included.
Bill