Savage 10T tinker project
I just wanted to post my rifle I got to a "finish" point. Turned out nicely. I have some progress pics. I gleaned the interweb for ideas, so I take no credit for any perceived creativity! I'm glad I called Krylon, as they gave me specific instructions on applying and working with some very different paints. I hope this can help someone who wants to tinker.
I did a 220 grit sand over the entire stock and degreased with denatured alcohol. Then I taped up border for adding grip via JB Weld.
http://i64.tinypic.com/ie420m.jpg
http://i63.tinypic.com/34nl2qd.jpg
http://i68.tinypic.com/f5aqhj.jpg
Then applied slightly set JB weld and textured with Popsicle stick. This is after masking tape is removed.
http://i64.tinypic.com/dfvjnq.jpg
http://i63.tinypic.com/w9fbe8.jpg
Next I did a base coat of Krylon Supermaxx flat black. This is some impressive rattle can paint. Sticks to everything and goes on very smooth.
http://i64.tinypic.com/2l89f7m.jpg
http://i66.tinypic.com/2u8xkz4.jpg
I waited 48 hours for my initial layers of base to cure, then used steel wool to knock down some rough left over from sanding the synthetic stock. After doing 2 quick, light coats of base, I then sponged on Behr Ultra Premium Indoor/Outdoor latex paint I got in tester size, and then did 3 coats of Krylon Covermaxx gloss clear acrylic. all this had to be done within 30 minutes, per Krylon, so that the base would bond with the latex and acrylic.
http://i64.tinypic.com/jzv6t4.jpg
After letting set-up for 24 hours, I re-assembled my rifle, attached my cheek riser, and this is what came together.
http://i66.tinypic.com/a4pil1.jpg
http://i65.tinypic.com/swb61w.jpg
http://i66.tinypic.com/j5bmgl.jpg
http://i65.tinypic.com/wwiw5w.jpg
http://i65.tinypic.com/2z50hav.jpg
I'm pleased with how it came out. And I'm glad spray paint has improved in the past 15 years!
