Shilen Match VS Select Match barrels
I know this is a opinionated question, but has anyone ever seen a difference between a Shilen Match and a Select match barrel ? I have a select match barrel, and thought about getting a match grade barrel. just wondering if anyone has experience with the two.
Does anyone know what the difference is? I have been told that the barrels start out the same way with same materials. I was told that the difference was with the lapping process. That they would take a barrel and lap it x amount of times, and if it passed inspection then it was a select match, if it did not pass then they would lap it again x amount of times, and check it, if it passed then it was a select match, if it did not, then they would lap it again, and if it passed inspection then it was a match barrel, if it did not pass then it was scrap.
I have also been told that the select match are of a better metal stock,and that the difference in group size would amount to 1/4" smaller with the select. I was also told that the Select match was hand lapped and the match was not.
So does anyone know the true difference? Does anyone have experience with the two barrels? I realize that this is highly subjective because barrels are like people and have their own personality, but can anyone prove that there is a significant difference between the two?
Re: Shilen Match VS Select Match barrels
The difference is about 25 bucks.... ;D
Re: Shilen Match VS Select Match barrels
Well acutaly about $40.00
Re: Shilen Match VS Select Match barrels
Raw barrel material is a very, very small market for the originating producer(s) of the product.
Some companies claim they have special metal in their barrels, but, if it is a stainless, it is the same stainless material that every other barrel maker offers. Same with moly.
Re: Shilen Match VS Select Match barrels
http://www.shilen.com/barrelGrades.html
Select Match barrels are all stainless. Match barrels are stainless or chrome moly. It appears that they hand lap all the stainless barrels, but only lap the chrome moly barrels as a special request.
The main difference is the inspection criteria. But, it is possible to have a Match barrel that conforms to the Select Match inspection criteria.
Re: Shilen Match VS Select Match barrels
One is straighter that the other and cleans up easier but they both seem to shoot well. My select match cleans up without a trace of copper while the other tends to have a small amout of copper in it.
You will have to be a benchrest shooter to notice the difference in accuracy!
Re: Shilen Match VS Select Match barrels
Quote:
Originally Posted by LSUBOY
You will have to be a benchrest shooter to notice the difference in accuracy!
Well, I am a competitive benchrest shooter, and this barrel is going on a LV benchrest for score gun.
Re: Shilen Match VS Select Match barrels
Shilen's site says it all. If your shooting competitively of any sort and your barrel is not the straightest and tightest tolerance's they produce, then your more then likely leaving something on the table. I personally don't believe saving 40 dollars is worth it. I've never owned a Shilen Match, I have owned 2 Shilen Select Match, one I still have in 7rsaum. This 7 will shoot right with my Lilja and Krieger Barrels.
Re: Shilen Match VS Select Match barrels
Is the $40 difference worth the chance of never knowing if the Select woulda shot better?
With all the other variables(load dev.,etc)thrown in the mix it may be hard to tell the difference in performance between the two, but I just wouldnt chance it for $40 if it were used for competition.
Now if it was for casual bench use and/ or varmint, I dont think it is as big a deal.
Re: Shilen Match VS Select Match barrels
I have both and cant tell a difference but.........for my br rigs I cant seem to buy the match.
Just like the Shilen br bullets I have on the shelf, they shoot just as good as any bullet I have tried but, they have a ragged meplat and I cant bring myself to shoot them in comp. I know, just brain stew but I cant get past it.
Steve
Re: Shilen Match VS Select Match barrels
Just to clarify a point, I charge $20.00 more for the Stainless Select Match Barrels versus the Stainless Match. I would never let $20.00, less than 7% of the total price on a 26" barrel become an issue.
Jim Briggs
NSS
Re: Shilen Match VS Select Match barrels
I have a 7WSM select match, that is an incredibly accurate barrel. Beautiful finish, and cleans up as easy as my Kreiger 6BRX. I will spend the extra to get the select match to make sure I get the same thing the next barrel I buy from them.
Re: Shilen Match VS Select Match barrels
ThorBird. is that a lapped ss or an unlapped chorme moly barrel?
Steve
Re: Shilen Match VS Select Match barrels
It is the lapped Stainless Steel (select match).
Re: Shilen Match VS Select Match barrels
Which are the shilen barrels midway sells? i got one in 260 and it dosnt say if its select match or match.
Re: Shilen Match VS Select Match barrels
Midway sells the match barrels. They don't say it, but they list the match tolerances.
Re: Shilen Match VS Select Match barrels
Midway sells the Match Grade.
Re: Shilen Match VS Select Match barrels
Have visited their plant, and can say that the SS Match/Select Match start off the same. It is not until later in the process that they determine which the barrel will be match or select match. The ss barrels are hand lapped - a little side note, everyone on the factory floor takes a trun at lapping barrels not just a group of people. I would not trade mine, and have been thinking about adding another one to replace the factory barrel on my 223 (just have to decide if it will stay 223 or become something else).
Re: Shilen Match VS Select Match barrels
C'mon guys read the website stuff: The difference between the select match and the match is that when airguaged. the select match has to guage no more than .0003 and the match .0005. So like I said before, one is just a little bit straighter than the other.
Re: Shilen Match VS Select Match barrels
I think I'm gonna order a couple from midway. My birthday is approaching, so I can get 10% off, plus use a coupon code if they come out with some new ones. I figure I can get them for $230 or so. I think I'm gonna build twin 6.5x47's - one for me and one for my dad.