Okay so I found a used T4A for my long action went to swap it out of the choate that it's been in and the screw I have for the rear of the trigger guard won't work. Does anyone know what type of screw I need and where to get it?
Printable View
Okay so I found a used T4A for my long action went to swap it out of the choate that it's been in and the screw I have for the rear of the trigger guard won't work. Does anyone know what type of screw I need and where to get it?
Wood screw, any hardware store you choose to go to.
That's what I have now but the stock has a threaded insert like a pillar
Take your stock to a local hardware store that has a good selection of loose bolts and screws, and hopefully a knowledgeable employee to help find what you need.
Or you could fill the hole with epoxy, insert a waxed wood screw let it cure, take out the screw put trigger guard in place put screw back in, done.
I would just find the proper sized screw to fit the current setup if it were me.
I'm going to take it to the hardware store thanks
It is a #8-32 screw 1/2 long. I bet manners would send you one if you can not find it.
Thank you Odindad