What does everybody use for a small base die on a 30BR
Thanks
Printable View
What does everybody use for a small base die on a 30BR
Thanks
Haven't had to yet... are you actually having problems chambering the brass in this cartridge?
Should be able to use a 308 small base die. I have a 30 Bellm and do this.
Yes the last little bit is very hard to close the bolt, I had the same problem with my 22Br and a small base 6Br die took care of the problem, the case neck on the 30BR doesnt allow it to fit in the 6BR die.
Something to investigate.
You might want to shoot Al a PM to elaborate a bit more using a ACP die.Quote:
Q: I'm starting to get bolt click on some of my 30br brass. I know a small base body die would fix this but none seem to be made.
A: A f.l. 45 ACP die will size the base just a skosh. The non-carbide ones size a bit more than the carbide ones.
http://forum.accurateshooter.com/ind...opic=3800220.0