Magpul stock for axis from a newbie

Hello guys,,,, i am new to guns but i did alot of research after lol.... i got my savage axis ... so we know about that stinky stock.. and they dont make after market units ok.... i was online and saw this buffer tube adapter for an ar15 made out of the plastic composit ... but it looked like it might work on a savage axis stock with a little fitting, cutting and a dremel tool...so i said to myself i will take a chance plus i love a challenge....so here it is but i am not completly finished,,,pictures are worth a thousand words........http://i1340.photobucket.com/albums/...psff5f9837.jpg the fitting at the top left ..i took my time and cut a little at a time to get the adapter as close as i could to the hand grip

i had to taper the magpul adaper in front a little ,,,and it fits real nice and snug...i tried to get a nice line on it but i needed to make sure there were openings to fill the stock at the joint with epoxy.... it also has a 45 degree bolt hole inside that can be used to help secure the unit and the curve right where the stock has been cut shoud be a perfect line up for a 1/4 screw and bolt ...the opening at the bottom i think i can control the bolt to get it lined up but really the bolt may not be needed.... saw some great 1 way screws at home depot number tens i will use to help fortify the joint i did all this in 2 hrs (actual working time)bottomhttp://i1340.photobucket.com/albums/...ps1c4b9dd2.jpgtophttp://i1340.photobucket.com/albums/...ps72f022dc.jpg these holes will be filled and sanded with epoxy

simi finished rough in done http://i1340.photobucket.com/albums/...ps404629ab.jpg gonna finish with the final sanding , epoxy fill all voids.. secure to stock and paint.... put on any ar stock you wanthttp://i1340.photobucket.com/albums/...ps057f1387.jpg

Congrats...
You've OFICIALLY made it to Savage OCD. Meetings are every Thursday at 8pm EST. Look forward to seeing you there.
We also have Reloaders OCD meetings on Tuesday if you need....

You've got my attention on this. I look forward to seeing your progress & the finished product.

Looks like its going to be very long. But good work

Quote:

---

Originally Posted by tyler.woodard04

Looks like its going to be very long. But good work

---

Interesting....


As above... it may be long. Check the overall length before gluing it in. Can't wait to see the finished project!!

i tried to get it as close as i could to where it needs to be so it could have been the approximate length of the original stock but could not get it any closer without loosing the strength needed or cutting to much load bearing material off the mating of the 2 connections..... we are looking at about 2 inches longer on stock with magpul fully in shortest position ..... i think this is the only con in the project...

yup 3 inches past the chaote sniper stock on my 12 bvss in closed position... the unit seems to be made of solid material so i can shorten it maybe a inch also i could take a a little less than 1/2 inch of axis stock but i really dont want to do that,,might loose the strength/ area needed in bonding ..the gun will only be used for target 30-06........

I couldn't find anything on magpul web that looked like that....steer me in the right direction where to find something like that....

http://www.exilemachine.net/shop/ the part is sold here...got it in 4 days under 30.00 if you are going to use on savage get a dremel it may extend your stock 3 inches past regular stock hard to get around it, got to do a lot of trimming and fitting...take your time.... took me about 3 hours to get it as short but strong as possible will be finished with mine soon ...will post info and pictures

this is as short as i can get it will do final trim and epoxy together.... 2 1/4 longer than chaote http://i1340.photobucket.com/albums/...psfbf730eb.jpg sniper http://i1340.photobucket.com/albums/...psde68108d.jpg http://i1340.photobucket.com/albums/...ps71827a1c.jpg very interesting thing is that the top and bottom of this adapter dam near lines up perfectly with the cut axis stock

Looks pretty sweet...I can't wait to see the finished product...then i'll send you my'in to do!!!Predator53

will be finished this weekend or sooner epoxied the adapter in and it is solid as a rock the lines where it is connected you wont even see it when I am finished.. it will look like one molded piece .. then I am going to do some reinforcing and some design adjustment on forend...will post pictures in a few....

here it is boss ....but stock is to long i will have to make a short non adjusting magpul or wood stock ... but the good thing is with that adapter i can have more than one kind... working on that stock reminds me of body work on a fiberglass car ... i reinforced the forearm with a method i found from one our fellow axis owners and i think member of this forum. ran two 1/4 inch steel rods and epoxied them in also i added 2 pictinny rails on eithere side to improve forearm grip ...i am waiting for my rubber rail covers to come in....check out the picshttp://i1340.photobucket.com/albums/...pse5739886.jpg http://i1340.photobucket.com/albums/...psc7ef48c9.jpg