Looking to buy a neck turner, any recommendations?
Printable View
Looking to buy a neck turner, any recommendations?
I've used both Forster and K&M. WHatever you buy, make sure you get the neck expander tool from the same manufacturer, to make sure the expander mandrel and the turning mandrel match up in diameter. That being said, I prefer the K&M expander as it has a longer shaft with a less abrupt angle at the tip, plus it had an screw in the end to prevent you from pushing the case too far up the shaft and boogering the tip of the case neck.
And their power adapter for holding the case and connecting it to a power screwdriver is pretty decent too.....
Elkbane
I use a Hart neck turner, and utilize the Sinclair standard and oversized mandrels for truing up and turning. A big +1 on the power case holder accessory.
Kevin
On neck tuner I highly recamend you buy a neck turner that matches a expander manderal. I have a forster, and it doese an OK job, but I have had to sit and fit my manderels to my expander manderel. The Sinclair cutters use the expander manderal out of there expander.
PMA makes a nice turner
http://pmatool.com/
and so does 21 centrey shooting supply.
http://www.21stcenturyshooting.com/R...g_Supplies.php
Thanks 82 BOY, you have directed me to what I was looking for.
I have the layman and not happy with it. It seems to shave more off of one side.
A Lyman was my first, and I quickly got away from it. I found that the shaft has some play in it, and when turning it will turn uneven.Quote:
Originally Posted by bajabill
I use both forster and KM I like forster better, I use the KM expanders from 6mm to 30 and a couple sinclairs