Axis Trigger Shim Mod (Non-AccuTrigger)
Published on 09-22-2012 07:14 PM
Today, i was handling my axis w/ the bolt out and i noticed that there was a lot of side to side play and wiggle with the trigger. So, what i did was take out the pin that the trigger pivots around and i put a tiny stainless steel washer on one side of the trigger. And, when i put my gun back together, the wiggle was greatly reduced, and when i dry-fired it, I realized that it did make the break of the trigger noticeably cleaner.
Information originally posted by Kaianuanu
DISCLAIMER:
The information contained in this article and the attached video are for educational purposes only. Should you choose to use this information to alter or modify your firearm you do so of your own accord. In doing so you accept full responsibility for any adverse affects, damages, injuries and/or death that may occur as a result. |
vBulletin Message