Published on 07-18-2012 05:01 PM
Number of Views: 828
While putting together our 2005 project rifles, a lot of thought was given to the individual components to be used in the test. While both rifles would be shooting a total of three thousand rounds, care had to be used in selecting a bullet and speed to make sure that both barrels would have consistent results. Many bullet manufacturers were considered, but only a few made the short list.
The short list, as it were, consisted of Hornady's A-Max, Sierras Match King and Lapua's Scenar. Those three were chosen for various reasons, some of which were the inherent quality of the bullets, the long bearing surface and subsequently high ballistic coefficients, and the boat tail design. The rifles were to be used primarily as long distance rifles, so these factors were necessary
...