• 93r17 Not Extracting/Ejecting Empties

    Just bought new 17hmr and first 4 shells would not eject. Had to use my knife to remove the casings. Now 1 out of 7 will not eject. I am shooting Hornady 17 grain Vmax. Also had 2 misfires from a box of 50.But they did fire after I ran thru the gun a second time. Has anyone else had this problem?

    Quote Originally Posted by jpdown View Post
    Clean chamber with brush to make sure you have removed all the factory perservative. This should help with the stuck cases. Misfires appear to be a common problem with these rifles. If it continues, send it back to Savage and let them fix the problem.
    Quote Originally Posted by jstanfield103 View Post
    I was reading a post about the Mark II after 250 rounds not ejecting the spent cases. Mine started doing it at approx. 350 rounds. I read where people were taking an 2ND ejector C clip and putting over the original C spring on the bolt to fix this problem. I called Savage and asked them about it and they did say people were having good results doing this and they sent me a C clip. All though after cleaning the rifle the ejection problems stopped I still put on the 2nd C clip. I fired approx. 200 rounds today no problems, time will tell.




    Comments 2 Comments
    1. SlimySquirrel's Avatar
      SlimySquirrel -
      Just fixed the exact problem with my MKII FVSS.

      I noticed the right extractor claw was flopping about instead of grabbing the empty case.

      I just bent the c clamp a touch and it worked fine. I will try to get another c clamp to pop over the top.
    1. tom snyder's Avatar
      tom snyder -
      I have an old model 29 .22 pump with the octagon barrel and it is in really good shape. It will fire just fine for 5 or 6 times and then it jams. The spent casing will hang in the mechanism with a fresh shell underneath it. Anybody know how to fix the problem





  • Help support Savage Shooters by
    joining Team Savage today!


    Upgrade to Team Savage