savage varmint action spacing

[bogger01]

i am trying to find out what the action spacing is on the savage single shot varmint action.

[gotcha]

bogger, I've got one of the last stnls single shots bought from NSS. Action screw spacing is 4.25" Dale

[bogger01]

ok,i appreciate it.thanks,marty

[sew0177]

Bigger,

My model 12 LRPV single shot is 4.4".

[bogger01]

huh.so they can be either.thanks,marty

[gotcha]

Bogger, My old single shot action & the LRPV are two different actions. Which action are you refering to ??? Dale

[bogger01]

its the old single shot varmint action.not the 3 screw target action

[gotcha]

I'm stumped. I'm not familiar w/ all the variations of the target (single shot) action. Except the two that have been mentioned. I don't want to give you incorrect info. I suspect my action is probably the same as yours but w/ a different trigger. (accutrigger in mine) Maybe another member can chime in here & shed some light..................... How 'bout it! Anyone ???????

[pdog06]

its the old single shot varmint action.not the 3 screw target action


Well, not to confuse you but...
-if it is the OLD 1st generation model 112 varmint action it would be an intermediate(or "J") action that has a screw spacing of 4.522". These came in blued only.
-if it is the 2nd generation single shot then it would have a screw spacing of 4.275". These came in both blued and stainless.
-and last but not least, the LRPV 3-screw target action has a screw spacing(front to rear) of 4.400".

Do you have the action in hand or just trying to buy one online or something?

[gotcha]

P dog, Thank you my son :D The historical references are appreciated. I measured my action screw spacing at the stock rather than dis-assembling & measuring at the action. So your figure could very well be more accurate. Nice to be among such knowledgeable people! Dale