Dirknar
05-14-2011, 05:36 PM
I decided to copy another guys doings and sand off the hideous wings of the B&C tactical stock. it was very easy to do. The hardest part was the getting the nerve to take the grind/sander to it..
I first taped it off.. Use a few layers of tape above the wings.
http://i24.photobucket.com/albums/c25/Dirknar77/IMG_20110513_155319.jpg
Here it is, with more sanding to go.
http://i24.photobucket.com/albums/c25/Dirknar77/IMG_20110513_165115.jpg
Here it is pretty much sanded flat. The "foam" on the inside, must be some kind of epoxy/resin foam, because it is HARD as a rock. I didnt feel that I removed any strength by sanding away the fiberglass shell in this area, so I just mixed up some JB-weld and Spackled it on and gave it some texture.
http://i24.photobucket.com/albums/c25/Dirknar77/IMG_20110513_165039.jpg
http://i24.photobucket.com/albums/c25/Dirknar77/IMG_20110514_131404.jpg
I first taped it off.. Use a few layers of tape above the wings.
http://i24.photobucket.com/albums/c25/Dirknar77/IMG_20110513_155319.jpg
Here it is, with more sanding to go.
http://i24.photobucket.com/albums/c25/Dirknar77/IMG_20110513_165115.jpg
Here it is pretty much sanded flat. The "foam" on the inside, must be some kind of epoxy/resin foam, because it is HARD as a rock. I didnt feel that I removed any strength by sanding away the fiberglass shell in this area, so I just mixed up some JB-weld and Spackled it on and gave it some texture.
http://i24.photobucket.com/albums/c25/Dirknar77/IMG_20110513_165039.jpg
http://i24.photobucket.com/albums/c25/Dirknar77/IMG_20110514_131404.jpg