View Full Version : 6mm lapua and slow burning powders
Chameleoncamo
03-21-2011, 12:38 AM
looking at loading 105-107 gr bthp in 6x47 lapua using some slower powders
8 twist 26 inch barrel. not to much info out there that i could find.
frank1947
03-25-2011, 12:30 AM
varget pretty popular in 6mm br not sure about 6x47 go to accurateshooter.com lot of good stuff on 6mm
GaCop
03-25-2011, 07:35 AM
Also check out 6mmBR.com, good information there too.
Nor Cal Mikie
03-25-2011, 07:49 AM
accurateshooters.com and 6mmBR.com are one in the same. ;)
GaCop
03-25-2011, 08:08 AM
OOPS! Your right! My bad.
Nor Cal Mikie
03-25-2011, 08:12 AM
You knew it all along. You were just testing the rest of us. ;D
GaCop
03-25-2011, 08:14 AM
Huh? Oh yeah, that's it!
Nor Cal Mikie
03-25-2011, 08:19 AM
Think positive. ;D
Chameleoncamo
03-25-2011, 07:00 PM
Thanks guys read all of that and most likely go that route. Curious if anyone has use rl-22 or 4831 or comparable powders.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.